The internal structural design is vane, Vane Damper is more suitable for soft close. ABD vane dampers are used to dampen drives, control speed, and many other applications. The damping direction of the vane dampers with continuous rotation can be clockwise, counter clockwise, or in both directions. Vane dampers are widely used in automobile interior decoration, household electric appliances, furniture and bathroom products, etc. Our dampers can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.
NOTE:
1. Please contact the corresponding product engineer for specific torque products.
2.The Standard of completion closing:the angle is 90° between Shaft A and Shaft B.
3.It is closing position to assemble the shaft into the housing.
4. Max. cycle rate: 3 cycles/min(Clockwise110 °, 110 ° anti-clockwise for 1 cycle)
5.Operating temperature:0~40℃
6.Storage temperature:-10~60℃
Soft closing time test: Measure the closing time from angle 70 to 0.
Rated Torque (T).
Test Temperature: 23±2℃.
Durability test:
Test Method: From the closing position to opening position, push back to 70°, soft close from 70° to 0°.
Rated Torque (T).
Operation Angle: 0°~110°.
Test Temperature: 23±2℃.
Durability test cycle: 50,000 cycles. The result of product test )>2s.
Vane Damper Vane Damper,High Temperature Dampers,Toilet Seat Vane Damper,Soft Down Damper,Storage Boxes Vane Damper Shenzhen ABD Equipment Co., Ltd. , https://www.abddamper.com
Product Feature
1.Light-weight,high strength
  Base on the nature of construction work,the hydraulic cylinders need to suit for high strength,high
  using frequency,high fatigability.to promise the sability and reliablity of application.
2.the seal system
  select the excellent seal kits from japan and germany.adopt the advanced physical design,make
  sure the hydraulic cylinder get the best piston rod oil film
3.cylinder body
  adopt the good-quality alloy honed tube,though cold-drawing and rolling,to reach an excellent
  toughness and surface hardness.improve the wear-resistance.
4.piston rod
  middle frequency induction hardening and tempering,chrome plated on rod surface to improve the
  anti-rust ,wear-resistance and anti-scratch property.
5.safety/cushioning fuction
  The inside of cylinder set up an cushioning device in the end of stroke,it can absorb the juge inpact.
Technological parameter
cylinder diameter (mm)
piston rod diameter (mm)
max stroke (mm)
40
20
22
25
500
50
25
28
32
600
63
32
35
45
800
80
40
45
55
2000
90
45
50
63
2000
100
50
55
70
4000
110
55
63
80
4000
125
63
70
90
4000
140
70
80
100
4000
150
75
85
105
4000
160
80
90
110
4000
180
90
100
125
4000
200
100
110
140
4000
220
110
125
160
4000
250
125
140
180
4000
Brand catalog
PC30, PC40, PC45, PC60, PC75, PC100, PC120, PC150, PC200, PC220, PC300, PC350, and PC400Â Â Â Â Â
E70B, E110, E120B, E215, E235, E307, E311, E312, E322, E180, E240, E200B, E320, E300, E300B, E330, and E325Â
DH55, DH200, DH220, and DH280Â Â Â Â Â
EX30, EX40, EX60, EX100, EX120, EX200, EX220, EX270, EX300, EX400, EX600, UH043, UH052, UH053, UH07, UH081, UH082, amd UH083
FH120, FH130, FH150, FH200, FH220, FH270, and FH300Â Â
R55, R60, R70, R80, R110, R130, R150, and R200
HD140, HD250, HD400, HD450, HD550, HD700, HD820, HD850, HD880, HD900, HD1220, and HD1250Â Â Â Â Â Â
SK40, SK60, SK100, SK120, SK200, SK220, SK04-2, SK07, SK07N2, SK09, SK12, SK14, SK300, SK310, and SK400Â Â
MS110, MS120, MS180, MS230, and MS280Â Â Â Â
MX8, SE200, SE210, SE280, and MX292Â Â Â Â
SH70, SH100, SH120, SH160, SH200, SH260, SH265, SH280, SH300, SH340, LS2650, LS2800, LS3400, and LS4300Â
Our company Product
1) Undercarriage spare parts: Track shoe, Track Link, Bolt, Track roller, Carrier Roller, Sprocket, Front Idler, Idler Cushion
2) Engine spare parts: Cylinder Head, Cylinder Block, Turbocharger, Piston, Piston Ring, Metal, Crankshaft, Oil Pump, Fuel injection Pump, Water Pump, Alternator, Starting Motor
3) Hydraulic spare parts: Main Valve, Main Pump, Soenoid Valve, Boom/Arm/Bucket Cylinder, Final Drive, Travel Motor, Swing Machinery, Swing Motor
4) Operator's Cab spare parts: Cab Ass'y, Monitor, Controller, Engine Controller, Wiring Harness, Seat, Air Conditioner, Air Compressor
We can make different cylinders from small to big, for different machine, like excavtor, crane, truck,Loaders, fork lifts..etc.Our quality is good and stable, we have competition price on the market, prompt delivery time.
Product Feature
1.Light-weight,high strength
  Base on the nature of construction work,the hydraulic cylinders need to suit for high strength,high
  using frequency,high fatigability.to promise the sability and reliablity of application.
2.the seal system
  select the excellent seal kits from japan and germany.adopt the advanced physical design,make
  sure the hydraulic cylinder get the best piston rod oil film
3.cylinder body
  adopt the good-quality alloy honed tube,though cold-drawing and rolling,to reach an excellent
  toughness and surface hardness.improve the wear-resistance.
4.piston rod
  middle frequency induction hardening and tempering,chrome plated on rod surface to improve the
  anti-rust ,wear-resistance and anti-scratch property.
5.safety/cushioning fuction
  The inside of cylinder set up an cushioning device in the end of stroke,it can absorb the juge inpact.
Technological parameter
cylinder diameter (mm)
piston rod diameter (mm)
max stroke (mm)
40
20
22
25
500
50
25
28
32
600
63
32
35
45
800
80
40
45
55
2000
90
45
50
63
2000
100
50
55
70
4000
110
55
63
80
4000
125
63
70
90
4000
140
70
80
100
4000
150
75
85
105
4000
160
80
90
110
4000
180
90
100
125
4000
200
100
110
140
4000
220
110
125
160
4000
250
125
140
180
4000
Brand catalog
PC30, PC40, PC45, PC60, PC75, PC100, PC120, PC150, PC200, PC220, PC300, PC350, and PC400Â Â Â Â Â
E70B, E110, E120B, E215, E235, E307, E311, E312, E322, E180, E240, E200B, E320, E300, E300B, E330, and E325Â
DH55, DH200, DH220, and DH280Â Â Â Â Â
EX30, EX40, EX60, EX100, EX120, EX200, EX220, EX270, EX300, EX400, EX600, UH043, UH052, UH053, UH07, UH081, UH082, amd UH083
FH120, FH130, FH150, FH200, FH220, FH270, and FH300Â Â
R55, R60, R70, R80, R110, R130, R150, and R200
HD140, HD250, HD400, HD450, HD550, HD700, HD820, HD850, HD880, HD900, HD1220, and HD1250Â Â Â Â Â Â
SK40, SK60, SK100, SK120, SK200, SK220, SK04-2, SK07, SK07N2, SK09, SK12, SK14, SK300, SK310, and SK400Â Â
MS110, MS120, MS180, MS230, and MS280Â Â Â Â
MX8, SE200, SE210, SE280, and MX292Â Â Â Â
SH70, SH100, SH120, SH160, SH200, SH260, SH265, SH280, SH300, SH340, LS2650, LS2800, LS3400, and LS4300Â
Our company Product
1) Undercarriage spare parts: Track shoe, Track Link, Bolt, Track roller, Carrier Roller, Sprocket, Front Idler, Idler Cushion
2) Engine spare parts: Cylinder Head, Cylinder Block, Turbocharger, Piston, Piston Ring, Metal, Crankshaft, Oil Pump, Fuel injection Pump, Water Pump, Alternator, Starting Motor
3) Hydraulic spare parts: Main Valve, Main Pump, Soenoid Valve, Boom/Arm/Bucket Cylinder, Final Drive, Travel Motor, Swing Machinery, Swing Motor
4) Operator's Cab spare parts: Cab Ass'y, Monitor, Controller, Engine Controller, Wiring Harness, Seat, Air Conditioner, Air Compressor
When the axis of rotation is moving, the blades that are connected to the axis of rotation rotate at the same time. The silicone oil in the oil chamber is squeezed between the blade andthe body to the back of the blade. The resistance formed by the pressure of the silicone oil to the area of the blade is the damping torque of the rotating shaft and the blade. The torque generated during rotation is determined by the oil viscosity, the pressure area of the blade and the clearance between the blade and the body.
Hydraulic Cylinder Barrel for Excavator Komatsu and Hitachi
Model NO.: HY-004
Size: Different
Certification: CE, ISO9001: 2000
Condition: New
Hydraulic Cylinder: #40 Chrome Steel
Trademark: Kangtec
Specification: Different
Origin: Dongguan, China
HS Code: 843141
Model NO.: HY-004
Size: Different
Certification: CE, ISO9001: 2000
Condition: New
Hydraulic Cylinder: #40 Chrome Steel
Trademark: Kangtec
Specification: Different
Origin: Dongguan, China
HS Code: 843141
We can make different cylinders from small to big, for different machine, like excavtor, crane, truck,Loaders, fork lifts..etc.Our quality is good and stable, we have competition price on the market, prompt delivery time.