Easy Install and Use Angle Bender Iron Sheet Bending Machine/ Metal Cutting and Bending Machine

Model NO.: WC67K(Y)Series
Type: Press Brake
Nominal Pressure: 3000kn
Length of Working Table: 3200mm
Distance Between Uprights: 2600mm
Motor Power: 22kw
Trademark: Mertal
Transport Package: Mainframe Naked, Spare Parts Packed in Case
Specification: Mertal
Origin: Nantong, China
HS Code: 84622990

Easy Install and Use angle bender iron sheet bending machine/ metal cutting and bending machine

1,Principal machine selects WC67Y series press brake bending machine;
2,Streamline design,high speed ,high precision,high rigiding of the CNC sheet metal bending machine;
3,Electro hydraulic servo system,full loop controlling the synchronization of the slide;
4,Equip with hydraulic crowning compensation on worktable and deformation compensation device on throat, makeing sure bending precision;
5,Backgauge is driven by digital AC servo motor, moved by ball screw,guided by linear guide.
Main configuration:
At both ends of the machine tool with two grating ruler (Y1, Y2), their effect is precise distance measurement on the slider and the workbench, the encoder is connected to the table, the deformation of side frame will not affect the position, the location data immediately sent to the control system, the calculation and the output signal control values (S1, S2). If you have any position error, numerical control system of two servo valve to make the necessary correction, this ensures that the workbench between the slider and always place an equilibrium state.
The main components adopt UGANSYSCAD three-dimensional finite element analysis and optimization design;Ensure that the machine design is beautiful,reliable structure and stable work.

Easy Install and Use Angle Bender Iron Sheet Bending Machine/ Metal Cutting and Bending Machine
Easy Install and Use Angle Bender Iron Sheet Bending Machine/ Metal Cutting and Bending Machine
Main technical data:
Easy Install and Use Angle Bender Iron Sheet Bending Machine/ Metal Cutting and Bending Machine

Plastic car exterior parts refer to front and rear bumper moulds, fog lamp moulds, and grilles and all plastic accessories, are requesting high quality with hardened steel 1.2738 or Finkl P20 hard steel in order to guarantee specified mould life such as 1000000shots. Plastic injection material is PP or ABS as per customer's requirement. Ceeto company has skilled design engineering team who is able to design plastic car bumper moulds as per part geometry, bumper mould design will be first considered hidden parting line or visible parting line according to DFM analysis and moldflow report.

Car bumper mould making factory

Cnc Workshop to make car bumper mould

Technical information for Car front bumper and rear bumper mould

  1. Design software: Pro-E
  2. Mould cavity: single cavity
  3. Molding material: PP, ABS, PE
  4. Mould cavity and core steel: 1.2738, P20, P20HH, 718H
  5. Hot runner system: Synventive, Yudo, HRS, Moldmaster
  6. Ejection system: Ejector pins, angle lifters
  7. Leadtime: 120 days
  8. Mould life: 500000 shots to 1000000 shots
  9. Mould packing: wooden box

Car bumper mould CNC milling

Ceeto Service Scope to manufacture car bumper mould

  1. Plastic bumper product DFM analysis
  2. Moldflow analysis
  3. Plastic car bumper mould design
  4. Plastic car bumper mould assembly drawing
  5. Plastic car bumper mould machining
  6. Plastic car bumper mould testing via injection molding machine
  7. Plastic car bumper mould packing
  8. Plastic car bumper samples packing
  9. Mould spare parts preparation
  10. We also support you for prototype mould design and manufacture

Plastic car bumper mould

Plastic Car Front Bumper and rear bumper mould test

Before we ship bumper mould to you, we will have bumper mould buy-off in house together with you, and we must make official at least three mould tryouts and 2000 empty cycle for mould to check if mould function is ok in a certain time.

Plastic bumper mould test on machine

Normally, you and we attend the validation procedure together and sign off after checking. What we are checking usually are as follows:

  1. Compatibility with Injection Machine to be used
  2. Is size of the mould ( Leight* width* Height ) correct?
  3. Is weight of the mould is correct?
  4. Are lifting eyebolts fully seated on the mold and not interfering with mold action?
  5. Are all transportation bars installed and in correct color as you request?
  6. Are knock-out holes for mechanical ejection and the layout correct as designed?
  7. Is electric box wired correctly as per injection machine standard?
  8. Are dimensions of locating ring correct?
  9. Is radius and orifice diameter of sprue bush correct?
  10. Are clamping features correct?
  11. Is the mold construction compatible with robot gripping if applicable to take off part?

Plastic bumper mould for car

Plastic car bumper mould material and heat treatment

What we will also inspect mould material and heart treatment as follows:

  1. Is any welding used on mold? Is welding process correct for the steel used?
  2. Have all mold plates been stamped with markings?
  3. Provide the heat treatment certificate and hardness for all applicable mold components
  4. Are moving parts nitrided? Provide nitride certificate.

We warmly welcome you to visit us and send us RFQ, we want to be your part of suppliers and we will do our utmost efforts to make high quality of moulds and products, if you have any doubts about technical points, please don't hesitate to let us know, we are looking forward to hearing from you, thanks a lot.

Automotive Exterior Plastic Injection Mould

Automotive Exterior Plastic Injection Mould,Injection Molding Automotive Parts,Plastic Car Front Bumper,Plastic Car Rear Bumper

Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com